Asus MEB-VM User Manual page 29

III. HARDWARE SETUP
17. ATI Multimedia Channel Connector (40-3 pin AMC)
This connector is used for video accessories such as video capture cards or tele-
vision tuners.
MEB-VM ATI Multimedia Channel Connector
18. CPU Fan Connectors (3-pin CPU_FAN)
This connector supports cooling fans of 500mA (6 Watts) or less. Orientate the
fans so that the heat sink fins allow airflow to go across the onboard heat sink(s)
instead of the expansion slots. Depending on the fan manufacturer, the wiring
and plug may be different. The red wire should be positive, while the black
should be ground. Connect the fan's plug to the board taking into consideration
the polarity of the this connector. NOTE: The "Rotation" signal is to be used
only by a specially designed fan with rotation signal.
WARNING! The CPU and/or motherboard will overheat if there is no airflow
across the CPU and onboard heatsinks. Damage may occur to the motherboard
and/or the CPU fan if these pins are incorrectly used. These are not jumpers,
do not place jumper caps over these pins.
MEB-VM Cooling Fan Connector
ASUS MEB-VM User's Manual
2
1
AMC
Ground
+12V
Rotation
CPU Fan Power
40
39
29