Asus M5A78L-M LX3 PLUS Manual page 34

6. USB 2.0 connectors (10-1 pin USB56, USB78)
These connectors are for USB 2.0 ports. Connect the USB module cable to any of
these connectors, then install the module to a slot opening at the back of the system
chassis. These USB connectors comply with USB 2.0 specification that supports up to
480Mbps connection speed.
M5A78L-M LX3 PLUS
M5A78L-M LX3 PLUS USB2.0 connectors
Never connect a 1394 cable to the USB connectors. Doing so will damage the
motherboard!
The USB 2.0 module is purchased separately.
7. CPU and chassis fan connectors (4-pin CPU_FAN and 3-pin CHA_FAN)
Connect the fan cables to the fan connectors on the motherboard, ensuring that the
black wire of each cable matches the ground pin of the connector.
M5A78L-M LX3 PLUS
M5A78L-M LX3 PLUS fan connectors
DO NOT forget to connect the fan cables to the fan connectors. Insufficient air flow inside
the system may damage the motherboard components. These are not jumpers! DO NOT
place jumper caps on the fan connectors.
Only the 4-pin CPU fan connector supports the ASUS Fan Xpert feature.
1-24
USB78 USB56
PIN 1 PIN 1
CPU_FAN
CHA_FAN
GND
+12V
Rotation
Chapter 1: Product introduction