Gps Data; Landmarks - Nokia E66 - E66 - Cell Phone User Manual

To download a new guide to your device, scroll to the
desired guide, and select Yes. You can pay for the
guides through a credit card or in your phone bill, if
supported by your service provider.

GPS data

Select Menu GPS
>
With GPS data, you can view your current location, find
your way to a desired location, and track distance.
Select Navigation
your trip destination,
information about your current location, or
to view your travelling information such as the
distance and duration you have travelled, and your
average and maximum speeds.
The application must receive positioning information
from at least four satellites to be used as a travelling
aid.
The trip meter has limited accuracy, and rounding
errors may occur. Accuracy can also be affected by
availability and quality of GPS signals.
Use GPS data
To check the signal strength of the satellites that
provide the positioning information necessary for
navigation, open any of the three views and select
Options Satellite
>
To set a landmark or location as the destination of your
92
trip, select Navigation
GPS data.
>
to view navigating information to
Position to view positioning
status.
Options Set
> >
destination. You can also enter the destination
latitude and longitude coordinates.
To remove the destination set for your trip, select
Navigation
To save your current position as a landmark, select
Navigation
position.
To activate the trip meter, select
Options > Start. To stop the trip meter, select
Options > Stop.
To reset all fields and start calculating the trip again,
select Trip distance
Trip dist.
To change the measuring system in use, select
Options
>
Metric or Imperial.
To enter the altitude calibration to correct the altitude
received from the positioning satellites, select
Options
>

Landmarks

Select Menu
Landmarks are coordinates to geographic locations
that you can save to your device for later use in
different location-based services. You can create
landmarks using the internal GPS receiver of your
device or network (network service).
Options Stop navigation.
> >
or Position, and Options
Trip distance
Options > Restart.
>
Settings Measurement system
>
Settings Altitude calibration.
>
GPS > Landmarks.
>
Save
>
>
>