Table of Contents
Advertisement
5
Slide the battery release latch to release the battery.
6
Pull the discharged battery out of the computer.
Sample removing the battery
Inserting a charged battery
1
Wipe the terminals of the charged battery with a clean cloth to
ensure a good connection.
2
Insert the charged battery into the slot until the latch
clicks.
The battery pack has been designed so that you cannot install
it with reverse polarity.
If the battery is leaking or its case is cracked, put on protective
gloves to handle it, and discard it immediately. Always dispose
of used battery packs in compliance with all applicable laws
and regulations. Put insulating tape, such as cellophane tape,
on the electrode during transportation to avoid a possible
short circuit, fire or electric shock. Failure to do so could
possibly result in serious injury.
Mobile Computing
Changing the main battery
117
Advertisement
Table of Contents
