Turning off the AF Assist Beam
The lamp will automatically light to assist focusing in low light conditions
when you press the shutter button halfway. You can turn off the lamp.
Changing the Image Display Time
You can change the length of time the images display directly after shooting.
Changing the Image Display Right After
Shooting
You can change the image display that appears after shooting.
Select [AF-assist Beam], then press the qr
●
buttons to select [Off].
Select [Review], then press the qr buttons to
●
select an option.
Off
No image displays
The image displays until you press the
Hold
shutter button halfway.
Select [Review Info], then press the qr
●
buttons to select an option.
Detailed
Displays detailed information (p. 45).
The area inside the AF frame is
magnified, allowing you to check the
Focus Check
focus. The procedure is the same as in
"Checking the Focus" (p. 114).
Changing Shooting Functions
143