Care And Maintenance; Troubleshooting - VTech Switch & Go Dinos - Span the Spinosaurus User Manual

7. Flip each of the wings down and
pull the feet down.
Note: To change the dino back into a plane, reverse the order of the
steps above.
CARE & MAINTENANCE
1. Keep the unit clean by wiping it with a slightly damp cloth.
2. Keep the unit out of direct sunlight and away from any direct heat
source.
3. Remove the batteries when the unit is not in use for an extended
period of time.
4. Do not drop the unit on a hard surface and do not expose the unit
to moisture or water.

TROUBLESHOOTING

If for some reason the unit stops working, please follow these steps:
1. Turn the unit OFF.
2. Interrupt the power supply by removing the batteries.
3. Let the unit stand for a few minutes, then replace the batteries.
4. Turn the unit ON. The unit should now be ready to play again.
5. If the product still does not work, replace with an entire set of new
batteries.
If the problem persists, please call our Consumer Services Department
at 1-800-521-2010 in the U.S. or 1-877-352-8697 in Canada, and a
service representative will be happy to help you.
8. Move the spine up.
1:1
8