Samsung HLR5656W - 56" Rear Projection TV Owner's Instructions Manual page 93

• For replacement, you will need a 5.91-Inch screwdriver and a pair of gloves.
Unplug TV, then use a
1
screwdriver to remove the
screws.
Remove the Lamp cover.
2
Remove the screw securing
3
the Lamp by using a
screwdriver.
Separate the Lamp from the
4
engine by holding the handle
and pulling it out.
To reinstall the Lamp, follow
5
these steps in reverse order.
NOTES
• Be sure the replacement Lamp is the same type.
• After replacing the lamp, align the lamp cover with the groove and secure the screws.
• The TV will not turn on if the lamp cover is not correctly closed (as this will activate the protective
circuit).
English - 93