Picture Control - Samsung HLR5656W - 56" Rear Projection TV Owner's Instructions Manual

Picture Control

Picture Control
You can select the type of picture which best corresponds to your viewing requirements.
English - 48
Changing the Picture Standard
1
Press the MENU button.
Press the ... or † button to
select "Picture", then press
the ENTER button.
2
Press the ENTER button
again to select "Mode".
3
Press the ENTER button.
Press the ... or † button to
select the desired picture
mode (Dynamic, Standard,
Movie, Custom), then press
the ENTER button.
Press the EXIT button to exit.
Alternate method
Press the P.MODE button on the
remote control repeatedly to select
the desired picture mode.
• Choose "Dynamic" for viewing the TV during the day or when
there is a bright light in the room.
• Choose "Standard" for the standard factory settings.
• Choose "Movie" when viewing a movie.
• Choose "Custom" if you want to adjust the settings according to
personal preference (see "Customizing the Picture Settings",
page 49).
Picture
Input Mode : Standard
Size : 16:9
Picture
Digital NR : On
DNIe Demo : Off
Sound
My Color Control
Channel
Film Mode : Off
Setup
Guide
Move Enter
Mode
Input Mode : Standard
Contrast
Picture
Brightness
Sharpness
Sound
Color
Channel
Tint G 50
Color Tone : Warm1
Setup
Reset
Guide
Move Enter
Mode
Dynamic
Input
Mode : Standard
Standard
Contrast
Picture
Movie
Brightness
Custom
Sharpness
Sound
Color
Channel
Tint G 50
Color Tone : Warm1
Setup
Reset
Guide
Move Enter
Standard
√
√
√
√
√
√
Return
√
90
50
65
60
R 50
√
Return
90
50
65
60
R 50
Return