Connecting To The Trigger Terminal; Connecting The Power Cord (Supplied Accessory) - JVC DLA-RS48U Instructions Manual

Connecting to the TRIGGER Terminal
This Unit
Do not use it to supply power to other devices.
Connecting to the audio terminal of another device may cause the device to malfunction or break down.
Using beyond the rated value will cause the unit to malfunction.
The trigger terminal outputs a voltage of 12 V. Exercise adequate caution to prevent short circuit.
The factory setting is "Off". To change the setting, configure the "Trigger" item in the menu (p. 62).
Connecting the Power Cord (Supplied Accessory)
B
Precautions to prevent fire and electric shock
The voltage capacity of this unit is large. Please connect it directly to the wall outlet.
When you are not using the equipment, please unplug the power cord from the outlet.
Connect it using only the power cord supplied.
Do not use a voltage other than the indicated power voltage.
Do not damage, break or modify the power cord. Do not place a heavy object on the power cord, or heat or pull it.
Doing so may damage the power cord.
Do not unplug the power cord with wet hands.
To [TRIGGER] Terminal
Trigger Cable (Sold Separately)
A Connect the power cord supplied to the power input terminal on
the main unit
B Insert the supplied power plug into the wall outlet.
A
Power Cord
(Supplied)
Screen
Trigger Input Terminal (Ø3.5)
25