Using With A Personal Computer - Brother PT 1950 - P-Touch 1950 B/W Thermal Transfer Printer User Manual

USING WITH A PERSONAL COMPUTER

By installing the P-touch Editor, Quick Editor and Printer driver, you can easily print labels
from your personal computer. Various auto format templates are available in the software
for easy label making.
What you'll need:
s
CD-ROM
The CD-ROM contains soft-
ware, etc., to install on a
personal computer.
Procedure :
NOTE :
• Do not connect the USB interface cable to a personal computer until the software has
been installed.
• Be sure to refer to the "Software Installation Guide" to install the software properly.
1
Start the personal computer, and then insert the CD-ROM into the CD-
ROM drive.
2
Install the software by following the instructions that appear on PC dis-
play. Refer to "Software Installation Guide" for detail.
3
When P-touch Editor and P-touch Quick Editor is installed, connect the
P-touch to your personal computer by using the USB cable and then
turn on the P-touch.
4
The Printer Driver will be installed automatically after you have con-
nected the P-touch to your personal computer.
8
s
Software Installation Guide
Keep for future reference.
s
USB interface cable
(not included)
Make sure that your USB
cable is of high quality con-
struction.