** DCTs Drive Strength **
ProcOdt(ohms)
Options are: Auto (default), 240 ohms, 120 ohms, 60 ohms.
DQS drive Strength
Options are: Auto (default), 0.75x, 1.0x, 1.25x, 1.5x.
Data drive Strength
Options are: Auto (default), 0.75x, 1.0x, 1.25x, 1.5x.
MEMCLK drive Strength
Options are: Auto (default), 0.75x, 1.0x, 1.25x, 1.5x.
Addr/Cmd drive Strength
Options are: Auto (default), 1.0x, 1.25x, 1.5x, 2.0x.
CS/ODT drive Strength
Options are: Auto (default), 1.0x, 1.25x, 1.5x, 2.0x.
CKE drive Strength
Options are: Auto (default), 1.0x, 1.25x, 1.5x, 2.0x.
Bank Interleaving
Enables or disables memory bank interleaving. Enabled allows the system to simultaneously access dif-
ferent banks of the memory to increase memory performance and stability. (Default: Enabled)
Channel interleave
Enables or disables memory channel interleaving. Enabled allows the system to simultaneously access
different channels of the memory to increase memory performance and stability. (Default: Enabled)
******** System Voltage Optimized ********
System Voltage Control
Determines whether to manually set the system voltages. Auto lets the BIOS automatically set the
system voltages as required. Manual allows all voltage control items below to be configurable. (Default:
Auto)
CPU PLL Voltage Control
Allows you to set the CPU PLL voltage.
Normal
2.220V ~ 3.100V
Note: Increasing CPU voltage may result in damage to your CPU or reduce the useful life of the CPU.
DRAM Voltage Control
Allows you to set memory voltage.
Normal
1.350V ~ 2.400V
Note: Increasing memory voltage may result in damage to the memory or reduce the useful life of the
memory.
Supplies the CPU PLL voltage as required. (Default)
The adjustable range is from 2.220V to 3.100V.
Supplies the memory voltage as required. (Default)
The adjustable range is from 1.350V to 2.400V.
- 41 -
BIOS Setup