Setup - Haier HW55-1010 User Manual

14
SETTING SPIN SPEED
Touch this button lightly to select the desired speed. When a speed is set,
the indicator light will be light on.
STRONG BUTTON
Touch this button lightly, the indicator light will be light on . you can increase the washing
time,rinsing times in main wash stage of the selected program, which is suitable for dirty clothes
START WASHING
When the washing machine is connected to the power socket and a program is selected,lightly
touch this button to start operation. During a wash cycle, touch it lightly ,operation will stop and the
indicator light start blinking.Touch it again to resume operation. To cancel a wash program during
a wash cycle, touch this button, when the indicator light start blinking, press the Power switch, the
program will be cancelled.
AFTER WASHING
Turn off the water supply and unplug the power cord. Open the washer door to prevent formation of
moisture and odours. Let the door open while not used.
TIPS FOR SAVING ENERGY
1. Collect clothes for one full wash load.
2. Avoid overloading the washing machine.
3. Prewash only heavily soiled clothes.
4. Reduce the amount of detergent or choose standard or delicate wash programs for slightly soiled clothes.
5. Choose a proper washing temperature. Modern detergents can wash with very good result already in lower temperature than
60°C. Only use higher temperature than 60°C for heavily soiled laundry.
6. Follow the dosage recommendation on the detergent package to avoid using too much detergent.
7. After entire washing cycle finish, all indicate lights go out
USING THE APPLIANCE
Remaining Time
stop
speed strong
Start/Pause
Remaining Time
speed strong
Start/Pause
Remaining Time
speed strong
Start/Pause
• • • • 30 C
90 C • • • •
• • • • • • • •
40 C 60 • • • • C
40 C