Charging The Battery - HTC Wildfire S U.S. Cellular User Manual

14 Getting started

Charging the battery

Before you turn on and start using HTC Wildfire S, it is recommended that you charge
the battery.
§ The battery is already installed in HTC Wildfire S when shipped. A thin film is
inserted between the battery and the compartment. You need to remove this film
before you can charge the battery.
§ Only the power adapter and USB cable provided in the box must be used to
charge the battery.
§ Do not remove the battery from HTC Wildfire S while you are charging it using the
power or car adapter.
1. Insert the small end of the USB cable into the USB connector.
2. Insert the other end of the USB cable into the power adapter.
3. Plug in the power adapter to an electrical outlet to start charging the battery.
As the battery is being charged, the notification LED shows a solid orange light. The
light turns to solid green when the battery is fully charged.
When you charge the battery and HTC Wildfire S is on, the charging battery icon
displayed in the status bar. After the battery has been fully charged, the charging
battery icon turns to a full battery icon
As a safety precaution, the battery stops charging when it overheats.
.
is