Setting Up Htc Sync To Recognize Htc Wildfire S; Getting To Know The Workspace - HTC Wildfire S U.S. Cellular User Manual

133 HTC Sync
Setting up HTC Sync to recognize
HTC Wildfire S
1. Connect HTC Wildfire S to your computer using the USB cable that came in the
box.
2. When HTC Wildfire S prompts you to choose a type of USB connection, tap
HTC Sync, and then tap Done. Wait for HTC Sync to recognize HTC Wildfire S.
3. On the Device setup screen, enter a name for HTC Wildfire S.
4. Click Save. The Device panel then opens.
To change the name of HTC Wildfire S later, click Overview > Device setup.

Getting to know the workspace

On the Device panel, you can set your sync options, see general information about
HTC Wildfire S, check the used and available storage space, and begin
synchronization.
The available categories and options depend on the device you've connected to
your computer.
§ You can click a category of items to see its sync options on the right side of the
Device panel.
Clicking Overview displays basic software information and storage usage, and
lets you change the name of HTC Wildfire S, or install third-party applications to
HTC Wildfire S.
§ The Sync now button lets you start syncing the categories and options you've
selected.
§ The estimated storage usage bar beside the Sync now button shows you the
estimated storage space that will be used when there are new items to be
synchronized and added to HTC Wildfire S.