Table of Contents
Advertisement
IdeaPad U160/U165 Hardware Maintenance Manual
Strategy for replacing FRUs for CTO, CMV, and GAV
Product definition
Dynamic Configure To Order (CTO)
This provides the ability for a customer to configure a Lenovo solution from
an eSite, and have this configuration sent to fulfillment, where it is built and
shipped directly to the customer. The machine label, Product Entitlement
Warehouse (PEW), eSupport, and the HMM will load these products as the
4-digit MT and 3-digit model, where model = "CTO" (Example: 1829-CTO).
Custom Model Variant (CMV)
This is a unique configuration that has been negotiated between Lenovo and
the customer. A unique 4-digit MT and 3-digit model is provided to the customer
to place orders (Example: 1829-W15). A CMV is a special bid offering.
Therefore, it is NOT generally announced.
•
•
•
•
General Announce Variant (GAV)
This is a standard model (fixed configuration). GAVs are announced and
offered to all customers. The MTM portion of the machine label is a 4-digit MT
and 3-digit model, where model = a "fixed part number", not "CTO" (Example:
1829-F1U). Also, PEW, eSupport, and the HMM will list these products under
the same fixed model number.
FRU identification for CTO, CMV, and GAV products
There are two information resources to identify which FRUs are used to
support CTO, CMV, and GAV products. These two sources are eSupport and
the HMM.
Using eSupport
For Key Commodities (Examples - hard disk drive, system board,
microprocessor, LCD, and memory)
•
•
•
18
The MTM portion of the machine label is the 4-digit MT and 3-digit model,
where model = "CTO" (Example: 1829-CTO). The PRODUCT ID portion of
the machine label is the 4-digit MT and 3-digit CMV model (Example: 1829-
W15).
The PEW record is the 4-digit MT and 3-digit model, where model = "CTO"
(Example: 1829-CTO).
eSupport will show both the CTO and CMV machine type models (Example:
1829-CTO and 1829-W15 will be found on the eSupport site).
The HMM will have the 4-digit MT and 3-digit CTO model only (Example:
1829-CTO). Again, CMVs are custom models and are not found in the HMM.
eSupport can be used to view the list of key commodities built in a particular
machine serial (this is the same record found in PEW).
eSupport can be accessed at the following Web site:
http://www.lenovo.com/support.
To view the key commodities, click on PARTS INFORMATION, then PARTS
LOOKUP. Enter the model type and serial number. The key commodities will
be returned in the eSupport record under PARTS SHIPPED WITH YOUR
SYSTEM.
Advertisement
Table of Contents
