Clone Programmer Cloning Procedures; Learning / Teaching A Master Tv Setup Using A Tll-1100A Clone Programmer - LG 42CQ610H Commercial Mode Setup Manual

Learning / Teaching a Master TV Setup using a TLL-1100A Clone Programmer

Caution: If the TV is in LodgeNet PPV Mode (check with the site administrator if you are not
certain), do not connect a clone programmer to the GAME CONTROL/MPI port, as this will
damage the clone programmer.
Cloning is accomplished using the
TV/clone programmer MPI ports for
communication (see figure).
TLL-1100A Cloning Notes
Read the IMPORTANT CLONING
•
INFORMATION on page 32 before
beginning any cloning procedures.
Ensure the TLL-1100A is either fully
•
charged or connected to AC power.
Learning and Teaching is only
•
possible between identical model
TVs; however, the TLL-1100A can
store up to eight different Master
TV Setups.
Learn Setup from Master TV
1. Ensure the Master TV is set up completely.
2. Tune/set the TV to an analog channel or Aux input, and then plug one
end of the MPI cable into the TV MPI port.
3. Turn ON the TLL-1100A.
4. Use the MODE button on the TLL-1100A to select Clone Mode.
5. Use the Left/Right arrows on the TLL-1100A to select the Memory CBank
(1 to 8) in which to store the Master TV Setup.
6. Plug the other end of the MPI cable into the MPI port on the bottom of
the TLL-1100A. The Clone Selection Menu will display on the TV screen.
7. Press 1 on the Installer Remote to select LEARN FROM TV from the
Clone Selection Menu. Then, press OK (Enter) to transfer the Master TV
Setup into CBankX on the TLL-1100A.
Learning usually takes about 90 seconds. "LEARNING IN PROGRESS"
will be displayed on the screen while the TLL-1100A copies the Master
Setup. When the Learning process is complete, a "LEARNING COM-
PLETE" message will be displayed.
8. When Learning is complete, disconnect the MPI cable from the Master TV.
206-4207

Clone Programmer Cloning Procedures

Antenna
or CATV
CLONE SELECTION MENU
Selected Bank: CBankX Saved
(1) LEARN FROM TV
(2) TEACH TO TV
(3) SET CLONE CLOCK FROM TV
(4) SET TV CLOCK FROM CLONE
(5) DISPLAY TV SETUP
(6) DISPLAY CLONE SETUP
TLL-1100A Clone
Programmer TV Link
Loader
MODE
MPI
Cable
RECEIVE
CLONE SELECTION MENU
Selected Bank: CBankX Saved
(1) LEARN FROM TV
(2) TEACH TO TV
(3) SET CLONE CLOCK FROM TV
(4) SET TV CLOCK FROM CLONE
(5) DISPLAY TV SETUP
(6) DISPLAY CLONE SETUP
CLONE CLOCK = XX:XX
TV CLOCK = XX:XX
THE CLONE IS VERSION VX.X.X
-
To change menu items, press
channel keys or digits.
-
To execute item, press Enter.
TLL1100A
Ready
MENU
ENTER
SEND
TLL-1100A
37