10 • Operating and Cleaning Your Ceiling Fan ..........15 • To reduce the risk of fire, electrical shock, or motor damage, do not use a solid-state speed control with this fan. Use only Hunter speed 11 • Troubleshooting ........16 controls.
Page 3
Support Brace Hunter’s patented 3-position mounting system provides you maximum installation flexibility and ease. You can install your Hunter fan in one of three ways, depending on ceiling height and your preference: Low Profile, Standard, or Angled mounting. The steps in this manual include Ceiling instructions for all three Installer’s Choice mounting methods.
• Drill holes for and install wood screws. • Identify and connect electrical wires. • Lift 40 pounds. If you need help installing the fan, your Hunter fan dealer can direct you to a licensed installer or electrician. Gathering the Tools You will need the following tools for installing the fan: •...
Do not over tighten. Steps 2-3 – 2-5 Flat Washer Toward Ceiling Peak 3” Screw For Angled Ceilings: Be sure to orient the ceiling plate so that the two tabs are pointing toward the ceiling peak. 42419-01 • 11/24/08 • Hunter Fan Company...
Go to 4 • Wiring the Fan. WARNING: Fan may fall if not assembled as directed in these installation instructions. Step 3-5 Ceiling Plate Tabs #8-32 x 1” Screw Canopy Slots 42419-01 • 11/24/08 • Hunter Fan Company...
4-7. Spread the wires apart, with the grounded wires on one side of the outlet box and the ungrounded wires on the other side of the outlet box. 42419-01 • 11/24/08 • Hunter Fan Company...
2. Press firmly on opposite sides of the ring toward the canopy. The tabs will flex out releasing the trim ring from the canopy. Step 5-4 Step 5-3 Step 5-5 42419-01 • 11/24/08 • Hunter Fan Company...
6 • Assembling the Blades Hunter fans use several styles of fan blade irons (brackets that hold the blade to the fan). 6-1. Your fan may include blade grommets. If your fan has grommets, Step 6-1 (Detail) insert them by hand into the holes on the blades.
CAUTION: The remote control device complies with part 15 of the FCC rules. Changes or modifications not expressly approved by Hunter Fan Company could void your authority to operate this equipment. Operation is subject to the following two conditions: 1.
8 • Completing Your Installation With or Without a Multi Staked Light Fixture Your Hunter fan comes with an integrated light fixture assembly and an optional switch housing cap and plug button. This feature gives you the option of installing the fan with OR without the included light fixture.
Page 12
190 Watts. Exceeding that limit or the marked limit on this product may result in fire hazard or improper operation. Shade Bulb Steps 8-8 – 8-10 42419-01 • 11/24/08 • Hunter Fan Company...
Page 13
Attach the lower switch housing to the upper Light Plug Connector switch housing with three #6-32 x 1/2” housing assembly Detail screws. Housing Assembly Screw Plug Connector Detail Steps 8-10 – 8-11 42419-01 • 11/24/08 • Hunter Fan Company...
9-6. You can mount the remote holder to any toggle switch plate with the screws already in the switch plate. Or, you can simply mount the remote holder on the wall. Steps 10-1 – 10-4 Step 10-5 Step 10-6 42419-01 • 11/24/08 • Hunter Fan Company...
To Change Airflow Direction Turn the fan off and let it come to a complete stop. Slide the reversing switch on the fan to the opposite position. Restart fan. Reversing Switch 42419-01 • 11/24/08 • Hunter Fan Company...
If you need parts or service assistance, please call 888-830-1326 or visit us at our Web site at http://www.hunterfan.com. Hunter Fan Company 2500 Frisco Avenue Memphis, Tennessee 38114 42419-01 • 11/24/08 • Hunter Fan Company...