Using External Devices; Decoder Or Satellite Receiver - Grundig AMIRA 26 LXW 68-7515 Manual

20

USING EXTERNAL DEVICES

Note:
Do not connect any other equipment while the device is switched on.
Switch off the other equipment as well before connecting it.
Only plug the device into the mains socket after you have connected the
external devices and the antenna.

Decoder or satellite receiver

In order for the television to receive encoded programs from a
privately operated station, a decoder is needed.
Connecting a decoder or satellite receiver
Decoder
PAY-TV
Connect the »AV1« socket on the television set and the appropriate
1
socket on the decoder using a EURO-AV cable.
Notes:
A satellite receiver can also be connected to this socket.
If you want to use both a satellite receiver and a decoder, the
decoder must be connected to the satellite receiver.
Using a decoder
Switch on the television and the decoder.
1
Press »AV«, select the channel »AV1« with »P+« or »P-« and
2
press »OK« to confirm.
_______________
AV 3
AV 2
AV 1
VIDEO L R VIDEO L R PC-DVI
ANT IN S-VHS PC-IN DVI-D
AUDIO IN
AV-4 AV OUT
AC IN