Table of Contents
Advertisement
2
Tick Include Bonjour for Bookmarks bar.
3
Select 'Philips AD7050W XXX' from
the Bonjour pull-down list shown at the
bookmarks bar.
» The AD7050W configuration web
page is displayed.
Change the internal Wi-Fi settings of
AD7050W
On the AD7050W configuration web page,
you can change the internal Wi-Fi settings of
AD7050W for connection of AD7050W to
your existing home Wi-Fi network.
Note
•
Make sure that the settings on the configuration web
page match your home Wi-Fi network settings that you
wrote on paper.
EN
16
•
Follow the on-screen instructions to
change and confirm the internal Wi-Fi
settings of AD7050W.
» After a while, the indicator on the back
of AD7050W turns solid green, and
the unit beeps.
» AD7050W is connected to your
existing home Wi-Fi network
successfully.
Note
•
If the WI-FI SETUP indicator on AD7050W does not
turn solid green, it means that the Wi-Fi connection
has failed. Please power off both your Wi-Fi router
and AD7050W and then power on them again to see
whether AD7050W can be connected to your home
Wi-Fi network. If the problem remains, try the above
procedures again.
•
After you finish the above changes or power-off and
power-on of AD7050W, the new Wi-Fi network
created by AD7050W will disappear.
Advertisement
Table of Contents
