Table of Contents
Advertisement
Lens Installation
When replacing the lens or using an optional lens, install the lens by following the instructions below. Ask the
sales dealer for detailed information of the optional lens specifications.
Attaching the lens to the projector
1
Remove the lens mount cover.
2
Fit the lens to the projector by aligning the red dot
on the lens with the red dot of the projector.
3
Slowly turn the lens clockwise until it clicks. Make
sure that the lens is fully inserted to the projector.
CAUTION
Do not press the lens release button when
attaching the lens.
Removing the lens
1
Shift the lens to the center position by using the
Lens shift function.
2
While pressing the Lens release button on the top
of the cabinet, turn the lens counterclockwise
until it stops and pull it out slowly from the
projector.
CAUTION
Be careful when handling the lens. Do not
drop.
- 14 -
Red dot
Lens Release button
Advertisement
Table of Contents
