Using The Es-1000; Setting Up The Es-1000; Calibrating The Es-1000 - EFI DocuColor 5252 Supplementary Manual

Using the ES-1000

1 Measure button
2 Sample aperture
3 White tile reference
4 Cradle
C M I
OLOR EASUREMENT
The ES-1000 is a hand-held
from printed output and other colored materials. Since the ES-1000 accurately measures
both the density and color of printed output, it is an effective tool for calibrating the
Fiery EXP6000/EXP5000.
N : The ES-1000 is available as a separately purchased option.
OTE

Setting up the ES-1000

To use the ES-1000 for calibration purposes, you must set it up for use with your computer.
For complete instructions on setting up and calibrating the ES-1000, see the documentation
that accompanies the ES-1000.
The following illustration shows the different parts of the ES-1000.
1
2
3

Calibrating the ES-1000

When you place the ES-1000 in the calibration cradle, white point calibration is used to
calibrate the spectrometer. Make sure the sample aperture is in full contact with the white tile
on the calibration cradle.
NSTRUMENTS
spectrophotometer that measures the
4
84
spectral light reflected