Support And Contact - TrekStor i.Beat vision DM 1GB Quick Start Manual

Table of Contents

Advertisement

Available languages
  • EN

Available languages

  • ENGLISH, page 9
Mode: USB host
Switch to "USB host" mode.
In the display, the message appears: "Wait for USB connection". In this mode, you can copy files from another
i.Beat vision
USB device to the
connection in the
i.Beat vision
i.Beat vision
The
quickly detects the connected USB device that is displayed as a "Device" in the Folder
Navigation. Use the navigation cross
button to copy a file to the
button again.
Note: All copied files are in the "USBHOST" folder.
Note: Given the very wide variety of different USB devices, TrekStor cannot guarantee compatibility with devices from
every manufacturer. Usually, however, there is no problem transferring data from other devices.
7) Settings
Press the
button for one second to retrieve the settings menu.
Use the navigation cross
Record and System), and confirm your selection by pressing the
Note: Folder Navigation may not be activated.

8) Support and contact

If you have questions regarding our products or need help, please contact use through our e-mail or
telephone support. The contact data can be found on the back of these quick guides or on our website
at http://www.trekstor.de/support.
Note:
• This MP3 player is optimized for the provided earphones (32 Ohm impedance). Using other earphones with a lower impedance can damage the
MP3 player or earphone, especially MP3 players with 2 earphone jacks.
• Note: This device can produce high volumes. To prevent hearing loss, do not listen to high volumes for long periods. Do not use in street traffic.
• Do not use USB cables longer than 3 meters.
The manufacturer retains the right to continuously improve the product. These changes may be made without being directly described in
these quick guides. For this reason, the information provided in these guick guides may not reflect the current state of the art.
The manufacturer only guarantees suitability for the product"s intended purpose. In addition, the manufacturer is not responsible for
damages or loss of data and subsequent consequences.
Copyright © 2006 TrekStor GmbH & Co. KG. All rights retained. Other cited product or company names may be trademarks or brand names
of the respective owner.
. Connect the USB host adapter included in the delivery to the USB host
, and connect the desired USB device to the USB host adapter.
to access as usual the files in connected USB device. Press the
i.Beat vision
, and confirm the copying process with "Yes" by pressing
to navigate through the different settings (General, Display, Timer, Modes, Sound,
button.
– 15 –
– 15 –
EN

Advertisement

Table of Contents
loading

Table of Contents