Drawing Objects - Texas Instruments TI-83 Plus User Manual

Drawing Objects

Use the
DRAW
segments, rays, vectors, circles, arcs, and polygons.
• To select the DRAW menu, press S.
Note
• If the GeoMaster™ menu bar is not displayed, press V.
• Press s to exit the menu item that is currently selected.
Drawing a Point
1. Select
2. Use the arrow keys to move the cursor where you want draw
the point.
3. Press ¯.
4. Press ¯ again or move the cursor away from the point.
Drawing a Line
1. Select
2. Use the arrow keys to move the cursor where you want to
create the first point for the line.
TI-83 Plus GeoMaster™ Application
menu to draw objects such as points, lines,
from the
Point
from the
Line
DRAW
menu.
DRAW
menu.
Page 25