Setting Rinse + Spin, Rinse + Spin; Setting Spin Only, Spin Only; Setting Soak, Soak; Saving Energy, Coldwash - LG WT1101CW Owner's Manual

4.3 cu. ft. large capacity top load washer with sleek easy front control panel
Hide thumbs Also See for WT1101CW:
Table of Contents

Advertisement

Available languages

Available languages

Setting RINSE + SPIN,
Select this option to rinse and spin a load separately from a
regular cycle. This can be helpful in preventing fresh stains
from setting in fabrics. You can change spin speed by
pressing SPIN SPEED repeatedly until the desired speed is
selected.
1
Press the POWER button to turn on the washer.
2
Press the
button until the RINSE+SPIN indicator light
is lit. (The cycle light will turn off.)
3
Press the
button to start the cycle. The washer will
start automatically.
Setting SPIN ONLY,
SPIN ONLY
This button activates the SPIN ONLY cycle to drain and spin.
1
Press the POWER button to turn on the washer.
2
Press the
button repeatedly until the SPIN ONLY
indicator light is lit.
3
Press the
button to start the cycle. The washer will
start automatically.
Setting soak,
SOAK
Helps removes stains by adding a soak time before the end
of the cycle. The cycle time will increase by 3o minutes. The
agitation of the washer will be weaker during a Soak cycle.
NOTE
y You cannot select the Soak option during the Tub Clean
cycle.
RINSE + SPIN

USING YOUR WASHING MACHINE

Saving energy,
COLDWASH™
For maximum efficiency, wash only small loads. (less than 8
lbs.)
NOTE
y Press and hold the COLDWASH™ button for three
second to activate or deactivate SIGNAL. SIGNAL is the
melody and button tones.
1
Press
, and press
desired cycle is selected.
2
Press
The washer will automatically adjust the cycle
settings.
3
Set any other desired options.
4
Press
.
NOTE
y When you select the COLDWASH™ option, wash time
will be increased up to 10 minutes.
y For high wash dfficiency, it is recommended to use
less than 8 pounds.
Adding extra rinse cycle,
EXTRA RINSE
You can add an extra rinse cycle to the default rinse cycle.
1
Press
, and press
desired cycle is selected.
2
Press
.
3
Press the desired option to use the other options.
- Skip to step 4 to use the default setting without
changing the options.
4
Press
.
25
repeatedly until the
repeatedly until the

Hide quick links:

Advertisement

Chapters

Table of Contents
loading

This manual is also suitable for:

Wt1201cvWt1201cwWt1201c seriesWt1101c series

Table of Contents