Step 3:
In the Terminal window, enter "smbutil lookup storage-XXXX" followed by
[Enter] key, where XXXX are the last four digits of the MAC address
printed on the SE-NAS-05 back panel.
•
For example, if your SE-NAS-05's MAC Address is 00-14-3F-AA-08-D5, you will need to enter "smbutil lookup
storage-08d5" in the Terminal window.
•
If you changed the SE-NAS-05 host name, you will need to replace the word "storage" with it. For example, if
you changed your host name to "FileServer", please type "smbutil lookup fileserver" instead. Host name is not
case sensitive.
Step 4:
The IP address of SE-NAS-05 will be resolved and displayed in the
Terminal window.
The screen shot shows an example of the IP address "192.168.5.181"
Step 5:
Open your web browser, such as Safari. In the URL address field enter the
IP address obtained in Step 4. For example: http://192.168.5.181 followed
by [Enter] key.
12