Table of Contents
Advertisement
SC4H/UF2 (FVH-T690 GB) Fri. Jan., 07/2000
®
VCR Plus+
You can easily program a timer recording by entering the
PlusCode
®
programming number (3 to 8 digits) published
in your TV Guide
®
, CATV guide or local newspaper.
On any occasion, you can preset a maximum of 8 programs
to be recorded during the next 1-year period, including the
ones programmed by normal timer recording. See
"PROGRAM TIMER RECORDING" on page 35.
You can also set any of the 8 time slots to repeatedly
record the same channel at the same time daily (Monday
through Friday) or weekly. Daily and weekly settings are
retained in the timer memory and will continue to cue the
VCR to record as long as tape is available.
During timer programming, you may want to take advantage
of convenient features that give you the option of saving the
title/type of program being recorded (Rec. List Super, page
27), having the VCR automatically set the proper tape
speed (Smart Speed Record Function, page 26), and
having the VCR automatically adjust the start and stop times
(Smart Time Record Function, page 36).
NOTE:
The clock time must be set before a VCR Plus+
programming system recording can be programmed.
Setting a VCR Plus+ Programming
System Recording
1
Follow the "Before starting" steps, under
"RECORDING" on page 25.
2
Press the VCR Plus+ button.
The VCR Plus+ TIMER SETTING menu
(PlusCode number) appears.
@@@@@PlusCode@number
@@@@@@@@---------
3
Press the number buttons (0 – 9) to enter the desired
PlusCode number.
œ EXAMPLE: To enter PlusCode number 4930 to
program a recording, at the SLP recording speed.
œ Press 4 – 9 – 3 – 0
NOTE: If you enter the wrong number by mistake,
press the < button to cancel, then enter the correct
number.
4
Press the OK button.
The recording date, start time, end time, channel
and recording tape speed appear.
@@@@@PlusCode@number
@@@@@@@@4930-----
@Ch@@Date@@Start@@End
@01@3/26Mo@8:00»@8:30»SP
PROGRAMMING SYSTEM
5
6
7
8
33
Check the channel number displayed on the screen.
For the channel numbers that appear highlighted
(gray background instead of green), continue the
programming until step I , and the channel will be
memorized. Once a channel has been memorized,
its number will not be highlighted.
If the channel number displayed is incorrect, press
the < button to erase the wrong number. Press the
number buttons to enter the correct channel
number.
NOTE:
Enter the channel number you normally
select when using your cable converter/decoder (if
you subscribe to a cable TV service), or the channel
number you select on the TV (if you do not subscribe
to a cable TV service).
To change the recording tape speed, press the
SP/SLP button.
For automatic speed selection, select "SS" for tape
speed. (See Smart Speed Record Function on
page 26.)
Press the > button to select the timer recording
mode, if necessary.
Timer Recording Modes
Daily (M-F):
Records a program at the same
time, Monday through Friday.
Weekly (WK): Records a program on the same
day and time each week.
Press the ù (or û) button to change the recording end
time, if necessary.
10 minutes are subtracted from or added to the
end time.
Continued on the next page. _
Advertisement
Table of Contents
