Vcr Setup Menu Options - Fisher FVH-T690 Operating Instructions Manual

Video cassette recorder
Table of Contents

Advertisement

SC4H/UF2 (FVH-T690 GB) Fri. Jan., 07/2000
ON-SCREEN MENU
Displaying the VCR Setup Menus
Before starting
œ Turn on the power (TV and VCR).
œ Set the TV to channel 3 or 4.
œ Press the VCR button on the remote control to select
the VCR operation mode.
œ If the VCR indicator is off, press the TV/VCR button
on the remote control.
The VCR indicator lights.
1
Press the MENU button on the remote control.
The main MENU appears.
2
Press the ù (or û) button to select the VCR setup
option, then press the OK button.
The VCR setup menu appears.
CATV/TV@@@@@@@zCATV@TV
Cable@box@@@@@zNo@@@Ch02
MTS@@@@@@@@@zST@SAP@Mono
Audio@out@@@zST@L@R@Mono
Child@Lock@@@@@On@@zOff
Off@timer@@@zOff@2Hr@6Hr
Auto@AV@Select@On@@zOff
[ùû]†Option
[<>]†Select@@@[MENU]†TV
3
Press the ù (or û) button to highlight the desired
option.
4
Press the > (or <) button once or more to move the
"z" indicator in front of your selection.
5
When finished, press the MENU button to save the
settings.

VCR Setup Menu Options

Reference pages are shown in square brackets.
CATV/TV [21]
œ Indicate whether you subscribe to cable TV or use
antenna.
Cable box [12, step 9]
œ If you use a cable converter/decoder (cable box),
set the output channel.
MTS [29]
œ Select the MTS (Multichannel TV Sound) mode -
stereo, SAP or mono.
Audio out [30]
œ Select the audio output mode.
Child Lock [40]
œ Select this to block picture and sound.
Off timer
œ Select this to set the VCR to automatically shut off
after a specified period of non-operation.
Off: The power will not be turned off automatically.
2Hr: The power is turned off after 2 hours.
6Hr: The power is turned off after 6 hours.
NOTE:
The Off timer begins counting down after the
last VCR activity. Approximately 5 minutes before the
power is turned off, the "Your VCR will be off shortly"
message is displayed.
Auto AV Select
œ Turn on and off the A/V output on the rear panel
when the VCR power is off.
On: The input signal at the front A/V input jacks is
sent to the rear A/V output jacks.
Off: No output signal when the VCR power is off.
18

Advertisement

Table of Contents
loading

Table of Contents