Lenovo 7515H4U User Manual page 32

Installing a drive in bay 1 or bay 2:
To install a drive in bay 1 or bay 2:
1. Remove the computer cover. See "Removing the computer cover" on page 14.
2. Remove the front bezel. See "Removing and reinstalling the front bezel" on
Figure 13. Locating the spare retaining bracket
3. Pull the metal static shield outward to remove it from the drive bay.
4. Slide the retaining bracket downward to remove it from the upper drive cage.
24
User Guide
Attention
Do not open your computer or attempt any repair before reading and understanding the
"Important safety information" in the ThinkCentre Safety and Warranty Guide that came with
your computer. To obtain a copy of the ThinkCentre Safety and Warranty Guide, go to:
http://www.lenovo.com/support
page 16.
Note: Notice the spare retaining bracket 1 attached to the side of the upper
drive cage.