Input Select; System Setup - Asus VX238H User Manual

• Focus: reduces the Horizonal-line noise and Vertical-line noise
of the image by adjusting (Phase) and (Clock) separately. The
adjusting range is from 0 to 100.
•
•
4.

Input Select

In this menu, you can select your
desired input source: VGA, DVI,
or HDMI.
• DVI: Available for model
VX238T, VX238N only.
• HDMI: Available for model
VX238H only.
5.

System Setup

Allows you to adjust the system.
• Splendid Demo Mode:
splits the screen into two for
Splendid mode comparison.
• Volume: Adjust the
earphone output volume
level. The adjusting range
is from 0 to 100.
• ECO Mode: Activate the ecology mode for power saving. (Some
gray levels may not be distinguished if ECO is ON. Its brightness
is lower than that when setting the Contrast Ratio to 100.)
• OSD Setup: Adjust the horizontal postition (H-Position), vertical
position (V-Position), OSD Timeout, DDD/CI, and Transparency
of the OSD screen.
• Language: Select OSD language. The selections are English,
French, German, Spanish, Italian, Dutch, Russian, Traditional
Chinese, Simplified Chinese, and Japanese.
• Information: Display the monitor information of Input Port,
Resolution, H-freq., V-freq, and Model Name.
• All Reset: Set to "Yes" to revert all settings to the factory default
status.
3-3
Phase adjusts the phase of the pixel clock signal. With a wrong phase
adjustment, the screen shows horizontal distrubances.
Clock (pixel frequency) controls the number of pixels scanned by one
horizontal sweep. If the frequency is not correct, the screen shows vertical
stripes and the image i not proportional.
VX238
Splendid VGA
Color HDMI1
Image HDMI2
Input Select
System Setup
Move Menu
VX238
Splendid Splendid Demo Mode
Color Volume
Image ECO Mode
Input Select OSD Setup
System Setup Language
Information
Move Menu
Chapter 3: General Instruction
Exit
OFF
50
OFF
English
1/2
Exit