JVC GZ-MG365B - Everio Camcorder - 680 KP Manual Book page 64

Changing the Menu Settings
BASIC SETTINGS
QUICK RESTART
Enables the camera to start up
quickly when you turn the power
off and then on again within fi ve
minutes by closing and opening
the LCD monitor. ("Power-linked
operation"
MONITOR BRIGHT
Enables you to set the brightness
of the LCD monitor.
MONITOR BACKLIGHT
Enables you to adjust the
brightness of backlight on the
monitor.
REC MEDIA FOR VIDEO
Enables you to set the recording
medium for videos.
REC MEDIA FOR IMAGE
Enables you to set the recording
medium for still images.
DATE DISPLAY STYLE
Enables you to set the date and
time display format.
LANGUAGE
Enables you to set the display
language. (
DROP DETECTION
Prevents damage to the HDD by
turning off the power automatically
when the camera detects that it has
been dropped.
REMOTE
Turns reception of the operation
signal from the remote control
on/off.
DEMO MODE
Introduces special features of the
camera at the following cases.
•
When the menu screen is closed.
•
When there is no operation for
about 3 minutes during recording
mode.
64
Menus
pg. 12)
pg. 17)
(Continued)
Settings: [ ] = Factory-preset
Select [BASIC SETTINGS], then select sub-menus.
OFF : Disables the function.
[ON] : Activates the function.
NOTES
•
This function is not available during charging.
•
You can reset the setting by pressing and holding the
power button.
•
Access/charge lamp blinks when this function is activated
and the camera is turned off.
Adjust the brightness of the display by using the touch
sensor.
BRIGHTER / STANDARD / [AUTO]
NOTE
When you select [AUTO], the brightness will automatically
be set to [BRIGHTER] when you use the camera outdoors
and to [STANDARD] when you use the camera indoors.
[HDD] / SD
[HDD] / SD
DATE STYLE:
year.month.day / [month.day.year] / day.month.year
TIME:
24h / [12h]
You have a choice of 7 languages. (
default language is [ENGLISH].
OFF : Disables the function.
[ON] : Activates the function.
To turn the unit on when the drop detection worked,
close the LCD monitor and open it again.
NOTE
Setting this function to off increases the risk of damaging
the built-in hard disk if the camera is accidentally dropped.
OFF : Disables operation with the remote control.
[ON] : Enables operation with the remote control.
OFF : Disables the function.
[ON] : Activates the function.
NOTES
•
The demonstration only works when the DC cord is
connected, not with the battery.
•
If a microSD card is in the camera, demonstration will not
take place even if the power is on.
pg. 72) The