JVC GZ-MG365B - Everio Camcorder - 680 KP Manual Book page 41

To Print Using the DPOF Settings
If the printer is compatible with DPOF, you
can use the DPOF settings. (
After performing steps 1-2 (
3
Select [DPOF PRINT].
4
Select [PRINT].
To stop printing after printing has
already started
1) Select [STOP].
2) When [QUIT PRINTING?] appears,
select [YES].
To confi rm the DPOF setting
In step 4, select [CHECK SETTINGS]. To
return to the previous screen, select
NOTES
•
If the printer is not recognized, disconnect
the USB cable, then reconnect it.
•
You cannot return to the previous screen
while operating Direct print. If you want to
redo the operation, remove the USB cable,
turn the camera off, and start the operation
again from the beginning.
pg. 39)
pg. 40)
.
41