VTech Smarty s Workshop User Manual page 9

ACTIVITIES
Exploring Activity
1. After the unit is turned on, it automatically enters the Exploring
Activity.
2. Use the HAMMER to pound the 4 light-
up nails in the NAIL STATION. You will
hear a sound effect and the light-up nail
will flash with the sound. You will see a
nail on the LCD SCREEN going down per
each activation of the nail. When a nail is
pound to its lowest position, Smarty will
identify its color.
Please Note: Do not put your ears near
the nails when the nails are being hit
strongly, this could be harmful to your
hearing.
3. Use the WRENCH to turn the bolts on
the BOLT STATION. As you turn the bolts,
you will see the bolt turning on the LCD
SCREEN. When a bolt is turned to its
lowest position, Smarty will identify its
number.
4. Use the SCREWDRIVER to turn the
screws on the SCREW STATION. As you
turn the screw, you will hear a screw
sound effect and see the screw on the
LCD SCREEN turning. If you turn the
screw to the right, the screw on the LCD
SCREEN will go downward. If you turn
the screw to the left, the screw on the LCD
SCREEN will go upward. When a screw
is turned to its highest or lowest position,
Smarty will identify its shape and size.
"Yellow Nail!"
"This is the
big square
screw!"
8
"Ten!"