VTech Smarty s Tool Box User Manual page 9

II. Measure
1. Press MEASURE BUTTON to learn how
to measure. You will hear a short tune
and "Measure it up!"
2. You will be asked to measure something.
For example, you will hear "Measure something 2 inches!"
3. If you measure to the correct number, you will hear "This is 2 inches!",
a positive sound effect, "Great job buddy!" and a melody. Then the
unit will ask another question, "Measure something longer!"
4. If you do not measure to the correct number, you will hear a sound
effect, and "Oops, Try again!"
5. On the third incorrect answer, you will hear "Give it another try!" The
unit will ask a new measuring question.
Electronic Drill
I. Identify It
1. Press the IDENTIFY IT BUTTON to
hear a short tune and "Let's get revved
up!"
2. This mode identifies the drill bits. Press
the HANDLE , to hear "Attach a drill bit!"
or a drill sound effect.
"Attach a
drill bit!"
8
"Measure it up!"
"Let's get
revved up!"
Find Matc
Identify
It
It
It