Installation; Positioning The Projector; Moving The Lens - Eiki Multimedia Projector LC-XG400 Owner's Manual

Positioning the Projector
For projector positioning, see the figures below. The projector should be set perpendicularly to the plane of the
screen.
✔ Notes:
• The brightness in the room has a great influence on picture quality. It is recommended to limit
ambient lighting in order to obtain the best image.
• All measurements are approximate and may vary from the actual sizes.
Screen Size
(W x H) mm
4:3 aspect ratio
Zoom (min.)
Zoom (max.)
Moving the Lens
For details about the Lens shift function, refer to "Lens Shift Adjustment" on page 28. The amount of lens shift
range varies depending on the lens. The figures below are for LC-XG400.
uppermost
leftmost
18
(for LC-XG400)
22.0' (6.7m)
16.4' (5.0m)
10.8' (3.3m)
3.9' (1.2m)
100"
78"
30"
30" 100"
610 x 457 2032 x 1524
3.9' (1.2 m) 14.1' (4.3 m)
––––– 10.8' (3.3 m)
50%
15%

Installation

32.8' (10.0m)
200"
150"
155"
116"
150"
3048 x 2286 4064 x 3048
21.3' (6.5 m) 28.5' (8.7 m)
16.4' (5.0 m) 22.0' (6.7 m)
downmost
rightmost
(Inch Diagonal)
300"
230"
200" 300"
6096 x 4572
–––––
32.8' (10.0 m)
50%
15%
Max . Zoom
Min . Zoom
(Center)