Table of Contents
Advertisement
CONNECTING PROJECTOR
This projector has input and output terminals on its back for connecting computers and video equipment. Refer to figures on
pages 11 to 13 and connect properly.
S-VIDEO INPUT JACK
Connect the S-VIDEO
output from video
equipment to this
jack. (Refer to P12.)
R – AUDIO IN – L
S – VIDEO
MCI
COMPUTER INPUT
TERMINALS (DIGITAL/ANALOG)
Connect the computer
(digital/analog) output to
one of these terminals.
(Refer to P13.)
Do not press this button. This button
is used for our optional accessories.
TERMINALS OF PROJECTOR
AUDIO INPUT JACKS
Connect the audio output
from video equipment to
these jacks.
(Refer to P12.)
When the audio output
is monaural, connect it
to L (MONO) jack.
VIDEO
Y – Pb / Cb – Pr / Cr
(MONO)
AUDIO IN
R –
AUDIO OUT
– L
COMPUTER
COMPUTER IN
USB
CONTROL PORT
ANALOG
COMPUTER AUDIO
INPUT JACK
Connect the audio output
(stereo) from computer to
this jack. (Refer to P13.)
VIDEO INPUT JACKS
Connect the composite video
output from video equipment
to VIDEO/Y jack or connect
the component video outputs
to VIDEO/Y, Pb/Cb and
Pr/Cr jacks. (Refer to P12.)
RESET
USB CONNECTOR (Series B)
When controlling the computer
with Remote Control Unit of this
projector, connect USB port of
your personal computer to this
connector. (Refer to P13.)
AUDIO OUTPUT JACKS
Connect an external
audio amplifier to these
jacks.
(Refer to P12, 13.)
RESET BUTTON
This projector uses a micro
processor to control this unit,
and occasionally, this micro
processor may malfunction
and need to be reset. This
can be done by pressing
RESET button with a pen,
which will shut down and
restart the unit. Do not use
RESET function excessively.
CONTROL PORT CONNECTOR
When controlling the computer
with Remote Control Unit of
this projector, connect the
mouse port of your personal
computer to this connector.
(Refer to P13.)
11
Advertisement
Table of Contents
