Canon EOS 6D Instruction Manual page 182

A Shooting with the LCD Monitor
About the Information Display
Each time you press the <B> button, the information display will change.
AF method
• d : FlexiZone - Single
• c : Face detection Live
mode
• f: Quick mode
Shooting mode
Drive mode
Metering mode
Image-recording
quality
HDR shooting/
Multiple exposures
AE lock
Flash-ready
Shutter speed
Flash exposure compensation
Eye-Fi card transmission status
The histogram can be displayed when [A1: Expo. simulation: Enable]
(p.189) is set.
You can display the electronic level by pressing the <B> button (p.60). Note
that if the AF method is set to [u Live mode] or the camera is connected to a
TV set with an HDMI cable, the electronic level cannot be displayed.
When <g> is displayed in white, it indicates that the Live View image
brightness is close to what the captured image will look like.
If <g> is blinking, it indicates that the Live View image is not being
displayed at the suitable brightness due to low- or bright-light conditions.
However, the actual image recorded will reflect the exposure setting.
If flash is used or bulb is set, the <g> icon and histogram will be
grayed out (for your reference). The histogram may not be properly
displayed in low- or bright-light conditions.
182
Possible shots
Aperture
Exposure level indicator
Maximum burst/Multiple exposures remaining
Battery check
AF point (FlexiZone - Single)
Wi-Fi transmission status
Histogram
White balance
Picture Style
Auto Lighting
Optimizer
GPS acquisition
status
Wi-Fi function
Exposure
simulation
AEB
ISO speed
Highlight tone priority