Usb Configuration - Asus M3A78-EMH HDMI User Manual

IRQ-xx assigned to [PCI Device]
When set to [PCI Device], the specific IRQ is free for use of PCI/PnP devices.
When set to [Reserved], the IRQ is reserved for legacy ISA devices.
Configuration options: [PCI Device] [Reserved]
2.4.7

USB Configuration

The items in this menu allows you to change the USB-related features. Select an
item then press <Enter> to display the configuration options.
Advanced
USB Configuration
Module Version - 2.24.3-13.4
USB Devices Enabled:
None
USB Controllers
Legacy USB Support
USB 2.0 Controller Mode
v02.61 (C)Copyright 1985-2007, American Megatrends, Inc.
The Module Version and USB Devices Enabled items show the
auto-detected values. If no USB device is detected, the item shows None.
USB.Controllers.[Enabled]
Enables or disables USB Controllers. Configuration options: [Disabled] [Enabled]
Legacy USB Support [Auto]
Allows you to enable or disable support for Legacy USB storage devices, including
USB flash drives and USB hard drives. Setting to Auto allows the system to
detect the presence of USB devices at startup. If detected, the USB controller
legacy mode is enabled. If no USB device is detected, the legacy USB support is
disabled. Configuration options: [Disabled] [Enabled] [Auto]
USB.2.0.Controller.Mode.[HiSpeed]
Allows you to configure the USB 2.0 controller in HiSpeed (480 Mbps) or Full
Speed (12 Mbps). Configuration options: [FullSpeed] [HiSpeed]
ASUS M3A78-EMH HDMI
BIOS SETUP UTILITY
[Enabled]
[Auto]
[HiSpeed]
Options
Disabled
Enabled
Select Screen
Select Item
+-
Change Option
F1 General Help
F10 Save and Exit
ESC Exit
2-29