Create Array; Raid 0 For Performance - Asus M2V-X User Manual

Create Array

1. From the VIA RAID BIOS utility main menu, select Create Array then
press <Enter>. The main menu items on the upper-left corner of the
screen are replaced with create array menu options.
Auto Setup For Data Security
Array Mode RAID 1 (Mirroring)
Select Disk Drives
Start Create Process
Channel
Serial_Ch0 Master XXXXXXXXXXX
Serial_Ch1 Master XXXXXXXXXXX

RAID 0 for performance

1. From the create array menu, select Array Mode, then press <Enter>.
The supported RAID configurations appear on a pop-up menu.
2. Select RAID 0 for performance then press <Enter>.
From this point, you may choose to auto-configure the RAID array
by selecting Auto Setup for Performance or manually configure the
RAID array for stripped sets. If you want to auto-configure, proceed to
the next step, otherwise, skip to step 5.
3. Select Auto Setup for Performance and press <Enter>. The
following confirmation message appears.
ASUS M2V-X
VIA Tech. RAID BIOS Ver 1.xx
Drive Name
RAID 0 for performance
RAID 1 for data protection
RAID 0/1
RAID SPAN for capacity
Auto create array will destroy all
data on disks, Continue? (Y/N)
Create a RAID array with
the hard disks attached to
VIA RAID controller
F1 : View Array/Disk Status
↑,↓
: Move to next item
Enter : Confirm the selection
ESC : Exit
Array Name Mode Size(GB) Status
ARRAY 0 SATA 999.99
ARRAY 0 SATA 999.99
XXXXXXX
XXXXXXX
5-13