Table of Contents
Advertisement
Intel Desktop Board D845GVFN Technical Product Specification
2.10 Mechanical Considerations
The Desktop Board D845GVFN is designed to fit into either a microATX or an ATX-form-factor
chassis. Figure 11 illustrates the mechanical form factor for the desktop board. Dimensions are
given in inches [millimeters]. The outer dimensions are 9.20 inches by 8.20 inches
[233.68 millimeters by 208.28 millimeters]. Location of the I/O connectors and mounting holes are
in compliance with the ATX specification.
INTEGRATOR'S NOTE
When installing the desktop board in a microATX chassis, make sure that peripheral devices are
installed at least 1.5 inches above the main power connector, the diskette drive connector, the IDE
connector, and the DIMM sockets.
6.50
[165.10]
6.10
[154.94]
0.00
1.700
[42.5]
.150
[3.81]
58
.800
[20.32]
2.600
[66.04]
0.00
Figure 11. Desktop Board Dimensions
5.20
[132.08]
9.050
[229.87]
8.800
[223.52]
OM17303
Advertisement
Table of Contents
