Asus M2N-VM SE User Manual page 44

9.. USB.connectors.(10-1.pin.USB56,.USB78,.USB910)
These connectors are for USB 2.0 ports. Connect the USB module cable
to any of these connectors, then install the module to a slot opening at the
back of the system chassis. These USB connectors comply with USB 2.0
specification that supports up to 480 Mbps connection speed.
Never connect a 1394 cable to the USB connectors. Doing so will damage the
motherboard!
The USB 2.0 module is purchased separately.
10.. Optical.drive.audio.in.connector.(4-pin.CD)
These connectors allow you to receive stereo audio input from sound sources
such as a CD-ROM, TV tuner, or MPEG card.
1-32
M2N-VM SE
R
M2N-VM SE
R
Chapter 1: Product introduction