Gigabyte GA-7TESH2-RH User Manual page 30

GA-7TESH2-RH Motherboard
1 ) CLR_CMOS (Clear CMOS jumper)
You may clear the CMOS data to its default values by this jumper.
Default value doesn't include the "Shunter" to prevent from improper use this jumper. To
clear CMOS, temporarily short 2-3 pin.
1
1-2 close: Normal operation (Default setting)
1
2-3 close: Clear CMOS
2 ) CLR_RTC (Clear RTC jumper)
1-2 close: Normal operation. (Default setting)
1
1
2-3 close: Clear RTC status
3 ) BIOS_RVCR (BIOS Revocery jumper)
1-2 close: Normal operation. (Default setting)
1
2-3 close: Enable BIOS Recovery function.
1
4 ) PASS_DIS (Skip Supervisor password jumper)
1-2 Close: Normal operation. (Default setting)
1
1 2-3 Close: Clear Supervisor Password in BIOS setup menu.
5 ) BMC_SEL (BMC Selection jumper)
1
1-2 Close: Normal operation. (Default setting)
2-3 Close: Enable BMC function.
1
6 ) PILOT_DIS (PiotII disable jumper)
1
1-2 Close: Normal operation. (Default setting)
2-3 Close: Disable BMC when firmware corrupted.
1
3 0