Creating A Raid Volume - Asus M2N-E SLI User Manual

Entering the NVIDIA
To enter the NVIDIA
1. Boot up your computer.
2. During POST, press <F10> to display the main menu of the utility.
The RAID BIOS setup screens shown in this section are for reference
only, and may not exactly match the items on your screen.
RAID Mode:
Free Disks
Loc
1.0.M
1.1.M
2.0.M
2.1.M
[F6] Back
At the bottom of the screen are the navigation keys. These keys allow you
to move through and select menu options.

Creating a RAID Volume

To create a RAID volume:
1. From the NVIDIA
Mode then press <Enter>. The following submenu appears.
Use the up or down arrow keys
to select a RAID mode then press
<Enter>.
5-20
RAID utility
®
RAID utility:
®
NVIDIA RAID Utility
- Define a New Array -
Striping
Disk Model Name
XXXXXXXXXXXXXXXXXX
XXXXXXXXXXXXXXXXXX
XXXXXXXXXXXXXXXXXX
XXXXXXXXXXXXXXXXXX
[←] Del
[F7] Finish
RAID utility Define a New Array menu, select RAID
®
Oct 5 2004
Striping Block:
Array Disks
Loc
[→] Add
[TAB] Navigate [↑↓] Select
Mirroring
Striping
Stripe Mirroring
Spanning
Optimal
Disk Model Name
[ENTER] Popup
Chapter 5: Software support