Connectors And Slots - Biostar TH67 Setup Manual

2.4 C
ONNECTORS AND
SATA1 ~ SATA6: Serial ATA Connectors
The motherboard has a PCI to SATA Controller with 6 channels SATA interface.
SATA1 & SATA2 satisfy the SATA 3.0 spec and with transfer rate of 6.0Gb/s;
SATA3 ~ SATA6 satisfy the SATA 2.0 spec and with transfer rate of 3.0Gb/s.
ATXPWR2: ATX Power Source Connector (TH67+ / TH67)
This connector provides +12V to CPU power circuit.
4-pin, please plug it into Pin 1-2-5-6 of ATXPWR2.
TH6 7 +/ TH6 7 / TH6 7 B
S
LOTS
SATA2
SATA 4
SATA 6
1
If the CPU power plug is
5
1
Pin Assignment
1 Ground
2 TX+
3 TX-
SATA1
4 Ground
SATA 3
5 RX-
SATA 5
6 RX+
7 Ground
4 7
8
Pin Assignment
1 +12V
2 +12V
3 +12V
4
4 +12V
5 Ground
6 Ground
7 Ground
8 Ground
11