Table of Contents
Advertisement
2.6.4 Boot Settings Configuration
Quick Boot
Boot Up Floppy Seek
Bootup Num-Lock
Typematic Rate Setting
x
Typematic Rate (Chars/Sec)
x
Typematic Delay (Msec)
OS Select For DRAM > 64MB
Full Screen LOGO
Halt On
Quick Boot [Enabled]
Enables or disables the quick boot feature. When Enabled, the system skips
certain tests while booting. Configuration options: [Disabled] [Enabled]
Boot Up Floppy Seek [Disabled]
Enable this item to check for a boot floppy disk during POST.
Configuration options: [Disabled] [Enabled]
The items Typematic Rate (Chars/Sec) and Typematic Delay (Msec) becomes
user-configurable only when the item Typematic Rate Setting is enabled.
Bootup Num-Lock [On]
Allows you to select the power-on state for the NumLock.
Configuration options: [Off] [On]
Typematic Rate Setting [Disabled]
Allows you to set the keystroke rate. Enable this item to configure the Typematic
Rate (Chars/Sec) and the Typematic Delay (Msec).
Configuration options: [Disabled] [Enabled]
2-32
Phoenix-Award BIOS CMOS Setup Utility
Boot
Boot Settings Configuration
[Enabled]
[Disabled]
[On]
[Disabled]
[Non-OS2]
[Enabled]
[All, But Keyboard]
6
250
Select Menu
Item Specific Help
Press [Enter] to
enable or disable.
Chapter 2: BIOS Setup
Advertisement
Table of Contents
