Test Mode; Service Mode - Samsung DV435ETGJRA/A1 Technical Information

ALIGNMENT AND ADJUSTMENTS
To avoid risk of electrical shock, personal injury or death; disconnect power to dryer before
servicing, unless testing requires power.

TEST MODE

Service Mode

How to enter:
-
To enter Service Mode , press Wrinkle Prevent + Temp. Keys 3 seconds in normal mode until it
sends out a beeping sound.
-
If pressing Wrinkle Prevent + Temp. Keys in Service mode , it will return Normal mode.
-
Even though entering Service mode, the operating cycle will not be influenced.
Touch Sensor Data Display Mode
Definition of Touch Sensor Data Display Mode:
-
This mode is default mode of entering service mode.
How to enter:
-
Once the unit enters service mode, the mode changes to touch sensor display mode.
-
This action will put the dryer into sensor bar touch data mode
- Dryer will display Sensor Bar data.
Cycle Count Mode
Definition of Cycle Count Mode:
-
This mode is to bring up the total number of cycles that User have carried out.
How to enter:
- Press the Mixed loaded bell key in Service Mode.
Software Revision Mode
Definition of Software Revision Mode:
- It is to retrieve its software version
How to enter:
At Service Mode, press Temp until it sends out a beeping sound
ex) In case of "U1 05", U1 means major version "U1", 05 means minor version "05".
-
If press Temp key In Software Version Mode, it will return Service Mode.
Data Display Mode
How to Enter:
-
If you press the time button in service mode, the mode changes to data display mode.
-
If pressing AdjustUp Key in this mode, Display Mode will be incresed.
-
If pressing AdjustDown Key in this mode, Display Mode will be decresed.
Definition of Data Display Mode:
- Display Mode 1 : Temperature data
-
Display Mode 2 : Average Touch Sensor data for 1 minute
-
Display Mode 3 : Average Temperature data for 1 minute
Technical_information-02835E_EN.indd 3
WARNING
3
2012-05-16 5:10:01