Setting The Password - Efficient Networks SpeedStream 5600 Series Installation Manual

Setting the Password

The router has no password protection as configured from the factory. As
soon as you log into the router, you should set the password. This can be
done from the HTML interface by clicking on the
from the command line interface using the
Password protection can be disabled again by entering the current
password and a blank for the new password. If the password is forgotten,
the router can be set to the factory default state from the serial port during
the boot process.
To reset router to the factory default state:
Log into the router through the serial port and get to the command
1
prompt.
Enter the "
2
reboot
3 During the boot process, the screen will start displaying a series of
periods ("."). Enter the word "
displayed.
NOTE: The default boot process will reset all user-configurable
parameters on the router to factory defaults.
It is wise to restrict physical access to the router to prevent the accidental
or malicious defaulting of your configuration.
24 How do you want to use the Router?
set password
" command
" while the dots are being
default
Set Password link or
command.
Efficient Networks, Inc.