Canon EOS 1 Instructions Manual page 114

Specifications
Custom Function
Control:
LCD Panel:
Remote Control:
Battery:
Battery Check:
Camera Back:
Dimensions:
Weight:
114
All data based on Canon's Standard Test Method. Subject to change without notice.
(7) Manual focusing using the electronic manual focusing
ring,(8) Selection of center-weighted average metering,
(9) AEB shooting sequence, (10) Cancellation of super-
imposed focusing points, (11) Focusing point selection
method, (12) Mirror up photography, (13) Spot metering
linked to focusing points, (14) flash output control.
Except for custom function No. F-12, same as in the
RS
EOS-1 N.
F-12 set to "0": No beeping when autofocusing is
achieved in the A mode.
F-12 set to "1": Beeping when autofocusing is achieved
in the A mode. (No beeping in the RS mode.)
Displays necessary information including AF mode, film
winding mode, metering mode, shutter speed, aperture
value, film speed, battery condition and exposure com-
pensation.
3-pin remote control socket provided.
(1) One six-volt 2CR5 lithium battery, housed in the grip;
(2) When the Power Drive Booster E1 is attached, the
lithium battery is removed and power is supplied from the
booster's power source (eight AA-size alkaline-man-
ganese batteries [or AA-size Ni-Cd batteries or AA-size
lithium batteries] or Ni-Cd Pack E1); (3) When the AA-
size battery pack BP-E1 is attached, power is supplied
either by the camera's lithium battery or by four AA-size
alkaline-manganese or Ni-Cd batteries.
8 size AA alkaline manganese batteries (Ni-Cd or
RS
lithium) or Ni-Cd Battery Pack E1
By pressing the battery check button; battery level shown
in four-step display in the LCD panel
Interchangeable with the optionally available Command
Back E1.
161 (W) × 112.1 (H) × 71.8 (D) mm
6-5/16" (W) × 4-7/16" (H) × 2-13/16" (D)
6-5/16" (W) x 6-1/8" (H) x 3-1/16" (D) mm
RS
855 gr / 30 oz without battery (body only, without lithium
battery)
1,295 gr / 36.7 oz (including battery magazine without batteries)
RS