Partial Metering ( ); Fine Spot Metering; Exposure Compensation; Aeb - Canon EOS 1 Instructions Manual

Specifications
Depth-of-Field
Preview:

■ EXPOSURE CONTROL

Light Metering:
Shooting Modes:
Metering Range:
Usable film speeds:
Exposure
Compensation:
110
(3) To the right of viewing area:
Exposure level scale (±3 stops in 1/3-stop incre-
ments), exposure level indicator (1 AE mode, expo-
sure compensation amount, 2 AE lock, real-time
meter deviation value, 3 manual exposure level, 4
AEB step amount, 5 background exposure when
using flash), remaining frame number display
Possible, by operation of depth-of-field preview button.
TTL full-aperture metering using a 16-zone SPC (silicon
photocell). Five metering modes available: evaluative
metering, partial metering (covers approx. 9% of the cen-
tral picture area), fine spot metering (covers approx.
2.3% of the central picture area: In continuous exposure
mode, first frame metered in real time, second and suc-
cessive frames shot at same settings (AE lock)), spot
metering (covers approx. 3.5% of the picture area at
each AF frame position) and center-weighted average
metering.
1 Shutter-priority AE (1/3-stop increments) 2 Aperture-
priority AE (1/3-stop increments) 3 Depth-of-Field AE 4
Intelligent Program AE 5 A-TTL program flash AE 6
TTL program flash AE 7 Manual exposure 8 Bulb
No depth-of-field-priority AE.
RS
At normal temperature with 50mm f/1.4 lens at ISO 100:
1 Evaluative metering, partial metering: EV 0 ~ 20 2
Fine spot metering: EV 3 ~ 20
EV 1-20 for evaluative and partial metering*, 2
RS
1
EV 1-20 for fine spot metering* (*At room temperature
with a 50mm f/1.4 lens and ISO 100 film.)
ISO 6~6400 (ISO 25~5000 when automatically set by DX
code)

(1) AEB:

±3 stops in 1/3-stop increments, shot according to
film winding mode in sequence of underexposure →
correct exposure → overexposure; repeatable, can
be used with self-timer for delayed 3-sequence expo-
sure.
In the RS mode, AEB cannot be set.
RS