Epson Progression Product Support Bulletin page 14

EPSON AMERICA, INC.
Product Support Bulletin
Subject: Release of VGAMODE.COM for the Epson Progression
Date: 12/04/92
Page(s): 1 of 1
The purpose of this bulletin is to inform you of the release of
VGAMODE.COM for the Epson Progression. This is a utility for setting
80/132 column and 25/43/50 row display modes in DOS. Approximately the
first 200 production units were inadvertently shipped with an incorrect version
of this utility called SETMODE.COM. Running this program causes the
message "This program will not run with the installed video controller." This
utility should be replaced with VGAMODE.COM.
VGAMODE.COM is part of the self-extracting file VGAMODE.EXE, which is
available for download from the Epson Product Support Bulletin Board
System. It is located in file library 80486L and should be downloaded with
protocol (such as XMODEM) and then executed. The archive also contains
the files README.TXT (installation and use instructions) and SETUP.SCP (a
new script file for the CHIPS and Technologies SETUP.EXE program).
PSB No: S-0151
Originator: MWT