D-Link WNA-2330 - Rangebooster G Cardbus 802.11G 108MBPS User Manual page 53

Section 5 - Troubleshooting
2. The computer does not recognize the WNA-1330 Wireless Adapter.
Make sure that the WNA-1330 Wireless Adapter is properly seated in the computer's cardbus slot. If Windows does
not detect the hardware upon insertion of the adapter, make sure to completely remove drivers that were previously
loaded.
3. The computer with the WNA-1330 installed is unable to connect to the wireless network and/or the Internet.
• Check that the LED indicators for the broadband modem are indicating normal activity. If not, there may
be a problem with the broadband connection.
• Check that the LED indicators on the wireless router are functioning properly. If not, check that the AC
power and Ethernet cables are firmly connected.
• Check that the IP Address, subnet mask, gateway, and DNS settings are correctly entered for the
network
• In Infrastructure mode, make sure the same Service Set Identifier (SSID) is specified on the settings
for the wireless clients and access points. The SSID factory default setting for D-Link products is default.
(Double-click on the WLAN icon in the taskbar. The Link Info screen will display the SSID setting.)
• In Ad-Hoc mode, both wireless clients will need to have the same SSID. Please note that it might be
necessary to set up one client to establish a BSS (Basic Service Set) and wait briefly before setting
up other clients. This prevents several clients from trying to establish a BSS at the same time, which
can result in multiple singular BSSs being established, rather than a single BSS with multiple clients
associated to it.
D-Link WNA-330 User Manual 53